Application:
SJ30 is used for extruding the material, sunch as PC PET PS PP PE, for lab using normally.
Main Technical Data:
Screw Diameter |
φ30mm |
L/D for screw |
25:1 |
Structure of screw |
special screw (LDPE) |
Screw material |
38CrMoAlA |
Nitriding depth |
0.5~0.7mm |
Surface hardness |
HV850~930 |
Heating type of barrel |
by mica tape heater |
Heating power |
3 sections totally, 1.15KW |
Cooling of barrel |
3 sections, cooled by air blowing |
Motor power |
4KW inverter |
Structure Description:
1) Frame
Welded by steel; treated by stress, with high rigidity and not easy to distorted.
2) Gearbox
As per the ZBJ19009-88 standard, gear and shaft are using high strength steel alloy. Precision of gear is based on GB10095-88, 6grade. Hardness is HRC-6. The special shaft is installed at the output end of hollow shaft to bear backward thrust. The line is with high loading capacity, stable to drive, with low noise and high efficiency.
Type: 133
- Speed reducing ratio 16:1
- Output power 3000W
- Hard surface is adopted, with low noise and long lift, reliable to run.
- Equipped a hole of driving shaft, could push out screw.
3) Charging barrel
- Material of barrel and screw: 38CrMoAlA nitriding steel
- Nitriding depth: 0.4~0.7mm;
- Nitriding hardness: 850HV for screw;930HV for barrel
- Dia. Of screw: 30mm
- L/C = 25:1
- Rotating speed of screw: 5~78 rpm
- Roughness of surface for screw: 0.4um
- Roughness of inner for barrel: 0.4um
4) Heating system
- 3 sets of mica tape heater, with outer stainless steel cover
- Heating power supply: 2~AC220V,50HZ; 0.95KW/set
5) Cooling system
- 3 sets of fans are used for cooling
- Fan power supply: 3~AC220V,50HZ; 50W
6) Main motor
- Motor power: 4000W, connecting with speed reducer directly, to save the dimension
- Speed is adjusted by inverter
7) Output capacity: PE:0.5~7Kg/h ; PVC:0.5~9.25Kg/h