Application:
This line can be used for sheathing submarine optic fiber cable by TIG welded metal pipe, and also can be combined with High speed Steel wire Armoring machine to be tandem line, to produce the Submarine Optic Fiber Cable (SSLT with optic fiber core, max. OD φ15mm, PE jacketing with steel wire armoring and TIG welded copper pipe)
When tandem running with high speed armoring machine, the length of 100KM can be produced continuously, with stable quality. It also has the function to repair if any missing welding point, as well as start-up, stop freely, and the line can weld continuously after re-start.
One more layer of copper pipe could be welded on SSLT. This line can draw the pipe to reduce diameter too.
Products produced by submarine optic fiber composite cable armoring machine:
Main technical data:
1. Cable core diameter: φ3~φ18mm
2. OD of welding pipe: φ5~φ20mm
3. Metal tape thickness: Copper tape: 0.3~1.0mm
4. Max.linear speed: 20m/min, can be adjusted step-less
Thickness of copper tape |
Max. linear speed |
Working speed |
0.5mm |
20m/min |
15 m/min |
0.6mm |
15 m/min |
13.0 m/min |
5. Welding type: DC, high frequency for arc
6. 2-Welding gun system, with 2 sets of welding power. Adjustable welding current for each welding power: 20~280A
7. Welding work can be synchronic with Caterpillar, so it can re-start after stop freely.Welding line is continuously.
8. Equipment Installed Capacity: 85KVA, Normally running is less than 50KVA.
Main Parts:
1. Copper tape pay-off
2. Tape connecting device
3. Wasted tape collector
4. Forming and welding machine
5. Tong type Caterpillar
6. High pressure cleaning and drying device
7. Repair welding device
8. Control cabinet